BWB Technologies

Complete with firmware for two separate calibration, curves, autocal when AFHS enabled Na, K and enhanced Li detection, Gas regilator, in-build air compressor, BIO-starter pack, “Just Add Gas”, (100V-250V, 50/60 Hz) Drain Trap Connecting Tubes Operation Manual PC Software (with interface cable), Fluid Kit Serum Calibration Standards (5 x 25ml Points 1,2,3,4,6 and 1 x 500ml Point 5- Calibration Correction), Urine Calibration Standards (5 x 25ml Points 1,2,3and 4 and 1 x 500ml Point 5- Calibration Correction), Diluent Concentrate (500ml), Decon 90 (150ml), Labware Kit 1ml Pipettes(10), 10ml Pipettes (10) , 100ml Volumetric Flask (1) and Sample Cups (100), IQ, OQ, PQ included, User selectable Li Internal Reference, Left handed Format

Complete with firmware for Serum and Urine, autocal with AFHS enabled Na, K, Li, Ca detection, Gas regulator, In-built air compressor, BIO-Starter Pack, Just Add Gas, (100V-250V, 50/60Hz), Drain Trap Connecting Tubes Operating Manual PC Software (with interface cable), Including BIO Starter Pack containing Fluid Kit Serum Calibration Standards (5 x 25ml Points 1,2,3,4,6 and 1 x 500ml Point 5- Calibration Correction), Urine Calibration Standards (5 x 25ml Points 1,2,3and 4 and 1 x 500ml Point 5- Calibration Correction), Diluent Concentrate (500ml), Decon 90 (150ml), Labware Kit 1ml Pipettes(10), 10ml Pipettes (10) , 100ml Volumetric Flask (1) and Sample Cups (100), IQ, OQ, PQ included, User selectable Li Internal Reference, Left handed Format

• Specially configured for a range of user interests

• “IRS” (Internal Reference Standard) caesium or lithium option

• Single point calibration correction

• Internal reference standards

• 5 and 6 point multi-ion calibration standards for urine and serum included

• Analysing Li and Ca along with Na and K

• Operator independent determination of results

• Advanced automated determination of results

• Integrated printer with environmentally friendly ink

• IQ, OQ, PQ web-based certification standard on BIO and available on all BWB FES units

• Correction of Ca for the interference from high levels of Na

BWB Flame Photometers have always been renowned for a highly stable and accurate lithium measurement. This winning formula has been developed further with specific adaptation and optimisation of the proprietary BWB optical array detection systems. A well earned thank you to Dr. Richard Roman of the University of Mississippi for his invaluable assistance on this Lithium specific FES. The BWB Li uses multiple lithium detection channels. This latest configuration has been exclusively designed to specifications laid out through consultation with our customers. The BWB Li is the first of it’s kind. Engineered with a single purpose, the BWB Li is the most accurate and advanced lithium flame photometer (FES) ever manufactured.

• Multiple lithium detection channels focused for high accuracy lithium measurements

• Built-in air compressor

• Solutions and labware included

• User selectable decimal places

• Intuitive user interface for true ease of use

• Display prompts step by step operation

• Built-in air compressor

• Data sharing via pc link with BWB’s FP-PC app

• IQ, OQ, PQ web-based certification available

The measurement of lithium at low concentrations within nuclear power stations has been identified as an application perfectly addressed by a new specialty flame photometer – The BWB Nuclear.

Designed in conjunction with our outstanding distributor in Germany, Mr. Wolfgang Glock, this unique flame photometer has 4 active channels for Lithium detection. Each channel is independently calibrated within the range of interest and this results in an increase of accuracy in keeping with industry demand.

Our simultaneous detection and display from each detection channel satisfies the requirement specifically and the tie of one of the channels to 2 wire 4-20mA output via supervisory control and data acquisition (SCADA™) links, completes the unit for online use.

Data output via our FP-PC PC application enables data sharing over the internet or intranet for users sharing information.

Clients who utilize our unique “Collection Cup” feature realise online real time analysis. Optional for ‘online’, continuous measurements, the collection cup turns the BWB NUCLEAR FES into an ‘online’, real time, 24/7 analyser with 4-20mA output linked to a single channel. Via a 2 wire output the BWB FP can seamlessly integrate with any SCADA™ system. Totally unique and available on all models.”

• 4 lithium detection channels focused for high accuracy lithium measurements

• 4-20mA SCADA™ two wire output set to client protocols

• In-built air compressor

• Solutions and labware included

• User selectable decimal places

• Data sharing via PC link with BWB’s FP-PC app

• IQ, OQ, PQ web-based certification available

• 10,000ppm calibration solution supplied, makes 15 litres of 100ppm solution

• 1ml and 10ml pipettes (10 each), 100x’s 20ml sample cups, 100ml flask

Potassium is essential to plant growth, fertilisers and soil substrates have been analysed using flame photometry for decades. Building upon 2017 research papers conducted by Professor Akiharu Sasaki for the specific use of flame photometer analysis in the agricultural industry over and above other methods of analysis the BWB SOIL Flame Photometer was born.

This unique instrument has been designed and developed in conjunction with various field requests and operational requirements for the specific analysis of fertilisers and soil substrates. Building upon the footprint of the award winning BWB XP instrument the SOIL offers all the benefits of our base product optimised over and beyond the requirements for analysis in the agricultural industry.

The SOIL instrument offers enhanced Ca detection alongside Sodium and Potassium with the option to utilise Lithium as an internal reference standard.

The ease of portability of this instrument and ‘Just add Gas’ configuration allows the instrument to be set up in the back of a van and conduct field analysis on site at various geographical locations. With a thermal printer fitted as standard, traceability for sample analysis is maintained throughout.

• Simultaneous detection and display of all 3 atoms of interest

• “IRS” (Internal Reference Standard) available

• Intuitive user interface for true ease of use

• Display prompts step by step operation

• Built-in air compressor

• Solutions and labware included

• Data sharing via pc link

• Operator independent determination of results

• 4 user selectable units of measure

• User selectable decimal places

• Integrated printer uses readily available paper

• IQ, OQ, PQ web-based certification available

• Can be used with either the BWB collection cup feature or our AFHS automated sample handling system

• Correction of Ca for the interference from high levels of Na

In keeping with the Globally accepted published papers from 1977 forward, potassium and sodium detection is now available online 24/7 with a Uniquely configured channel of detection for extreme accuracy along the range of potassium control.

This winning proprietary format has been improved with a unique adaptation and optimisation of the proprietary BWB optical array detection systems, which in this iteration of the BWB Specialty Flame Photometers allows for a single channel of precise and accurate potassium and sodium measurement.

This Specialty Flame Photometer has been requested and designed for the global Sugar Production marketplace.

There were a few traditional Flame Photometer manufacturers over the decades who had served this market and now these robust and fantastic units are coming out of service.

​Enter the BWB SUGAR Flame Photometer with specialised potassium and sodium channel detection, supplied with hybridised specific needs multiple point calibration solutions for potassium and sodium. Per our customers’ requests, our Collection Cup provides Real Time sample access for our mixing chamber/detection systems and only requires that the sample be at or near ambient temperature and customer provided ~5ml/minute feed to our unique “Collection Cup” system.

FP/PC APP
This totally unique BWB feature allows multiple installations details to be shared via intranet or internet links to provide “Distributed Control” via a single Control room with staff completely remote from the Refinery site itself.  For large Sugar Companies with multiple sites around the world, this allows Expertise from a centralized location anywhere in the world with real time virtually limitless data accumulation and analysis.

.csv files allow users to construct novel and proprietary Excel spread sheets and to share data quickly and efficiently.

• Uniquely hybridized BWB dual channel, focused for high accuracy potassium and sodium measurements

• “IRS” (Internal Reference Standard) available

• 4-20mA 2-wire output compatible with SCADA software

• Live online monitoring

• Constant condensation stream feeds with use of the proprietary BWB collection cup

• Built-in air compressor; pioneered by BWB technologies in 2007 and proven now with over 1000 units in global field use

• Solutions and labware included; “Just Add Gas”, the hallmark of the user friendly BWB flame photometer (FES) program

• User selectable decimal places

• Intuitive user interface for true ease of use

• Display prompts step by step operation

• Data sharing via PC link with BWB’s FP-PC app

• Simultaneous detection and display of all 4 atoms of interest

• “IRS” (Internal Reference Standard) caesium or lithium option

• Intuitive user interface for true ease of use

• Display prompts step by step operation

• Built-in air compressor

• Solutions and labware included

• Data sharing via pc link

• Operator independent determination of results

• 4 user selectable units of measure

• User selectable decimal places

• Optional integrated printer uses readily available paper (added option)

• IQ, OQ, PQ web-based certification available

• Correction of Ca for the interference from high levels of Na

Complete with 5 simultanious detectors Na, K, Li, Enhanced Ca & Cs for IRS, Gas Regulator, Inbuilt Air Compressor, Thermal Printer & AFHS Link, Starter Pack and Fluids Kit “Just Add Gas”, (100V-250V, 50/60Hz), Drain trap connecting tubes operating manual PC software (with Interface cable), Including Starter Pack Containing Fluid Kit Diluent Concentrate (500ml), Decon 90 (150ml), Sodium Standard 10,000ppm (150ml), Potassium Standard 10,000ppm (150ml), Lithium Standard 10,000ppm (150ml), Calcium Standard 10,000ppm (150ml), Cesium Standard 10,000ppm (150ml), Labware Kit 1ml Pipettes(10), 10ml Pipettes (10), 100ml Volumetric Flask (1) and Sample Cups (100)

The BWB XP PLUS was designed around the BWB-XP providing enhanced functions to give more utility while maintaining the unsurpassed levels of accuracy, usability and reliability while significantly reducing analysis time. Our customers do not need to waste valuable time changing filters and re-calibrating when a different measurement is required, as is a common requirement in all other Flame Photometer designs from 1951 to the present.

The BWB XP PLUS is the first and only 4 channel flame photometer with simultaneous detection and display of Sodium, Potassium, Lithium, and Calcium with an option to use either Cesium or Lithium as an Internal Reference System (IRS) that acts as an internal standard to adjust small changes during calibration and measuring.​

With clean lines and contemporary bright colour schemes, the XP PLUS looks exceptionally modern and will fit into any laboratory.
The instrument has a large LCD display, which can be viewed easily from a wide angle.

Our metal casework provides a sturdy portable instrument and enables future recycling opportunities. ROHS compliant components and materials are used wherever possible.

The BWB Carbon Footprint is exceptionally low, in keeping with corporate objectives of being a responsible manufacturer.

Unlike other manufacturers who charge extra for vital accessories, BWB include everything required to use the product straight out of the box. Just add Gas!! (Propane, LPG or butane)

We also provide, as standard, data sharing via USB from the BWB XP to your PC. This ties the output of the BWB Flame Emission Spectrometer (FES) to the Internet or your company intranet systems and facilitates Distributed Control which is vital for Multi-National companies, Universities and various Governmental agencies.

• Simultaneous detection and display of all 4 atoms of interest

• “IRS” (Internal Reference Standard) cesium or lithium option

• Intuitive user interface for true ease of use

• Display prompts step by step operation

• Built-in air compressor

• Solutions and labware included

• Data sharing via pc link via USB

• Operator independent determination of results

• 4 user selectable units of measure

• User selectable decimal places

• Integrated printer option uses readily available paper

• IQ, OQ, PQ web-based certification available: IQ OQ PQ is completely unique in the analytical instrumentation arena.

2 Simultaneous channels for analysis of Na & K. Built in air compressor, gas regulator & drain trap. Starter Pack and Fluids Kit “Just Add Gas”, (100V-250V, 50/60Hz). Gas hose and waste tube. Digital operating manual, PC software (with Interface cable).
Including Starter Pack Containing : Fluid Kit: Diluent Concentrate (500ml), Decon 90 (150ml), Sodium Standard 10,000ppm (150ml), Potassium Standrad 10,000ppm (150 ml).
Labware Kit: 1ml Pipettes(10), 10ml Pipettes (10),100ml Volumetric Flask (1) and Sample Cups (100).

The BWB Flash was created by combining the award-winning features of our XP model with new, innovative, and cutting-edge technology to provide unrivalled levels of accuracy, usability, and reliability while significantly reducing analysis time. When a different measurement is required, our customers do not need to waste valuable time changing filters and re-calibrating, as is a common requirement in all other Flame Photometer designs from 1951 to the present.

Our metal casework creates a sturdy portable instrument with nearly limitless future recycling possibilities. Of course, ROHS-compliant components and materials are used throughout.

The BWB Carbon Footprint is exceptionally low, in keeping with the company’s goals of being a responsible manufacturer, and we’ve succeeded in lowering the gas consumption rate by 13% while also lowering the electricity consumption (kWh) by 26% compared to previous model generations.

Unlike other manufacturers who charge extra for essential accessories, BWB includes everything needed to use the product right away. Simply add Gas!! (Propane, LPG, or butane) We also include data sharing via USB from the BWB Flash to your PC as standard. This connects the BWB Flame Emission Spectrometer (FES) output to the Internet or your company intranet systems, allowing for Distributed Control, which is critical for multinational corporations, universities, and government agencies.

• Large 5″ touch screen display compatible with the majority of disposable laboratory gloves

• True ease of use with large buttons and simple to understand text and symbols

• Built-in air compressor and gas regulator

• Calibration standards supplied as standard in 10,000ppm concentrations

• Auto-read technology enables operator independent determination of results

• User selectable decimal places

• IQ, OQ, PQ web-based certification available: IQ OQ PQ is completely unique to the analytical instrumentation arena.

• Complete set of basic labware included to get you started

3 Simultaneous channels for analysis of Na, Li & K. Built in air compressor, gas regulator & drain trap. Starter Pack and Fluids Kit “Just Add Gas”, (100V-250V, 50/60Hz). Gas hose and waste tube. Digital operating manual, PC software (with Interface cable).
Including Starter Pack Containing : Fluid Kit: Diluent Concentrate (500ml), Decon 90 (150ml), Sodium Standard 10,000ppm (150ml), Potassium Standrad 10,000ppm (150 ml), Lithium Standrad 10,000ppm (150 ml).
Labware Kit: 1ml Pipettes(10), 10ml Pipettes (10),100ml Volumetric Flask (1) and Sample Cups (100).

The BWB Flash was created by combining the award-winning features of our XP model with new, innovative, and cutting-edge technology to provide unrivalled levels of accuracy, usability, and reliability while significantly reducing analysis time. When a different measurement is required, our customers do not need to waste valuable time changing filters and re-calibrating, as is a common requirement in all other Flame Photometer designs from 1951 to the present.

Our metal casework creates a sturdy portable instrument with nearly limitless future recycling possibilities. Of course, ROHS-compliant components and materials are used throughout.

The BWB Carbon Footprint is exceptionally low, in keeping with the company’s goals of being a responsible manufacturer, and we’ve succeeded in lowering the gas consumption rate by 13% while also lowering the electricity consumption (kWh) by 26% compared to previous model generations.

Unlike other manufacturers who charge extra for essential accessories, BWB includes everything needed to use the product right away. Simply add Gas!! (Propane, LPG, or butane) We also include data sharing via USB from the BWB Flash to your PC as standard. This connects the BWB Flame Emission Spectrometer (FES) output to the Internet or your company intranet systems, allowing for Distributed Control, which is critical for multinational corporations, universities, and government agencies.

• Large 5″ touch screen display compatible with the majority of disposable laboratory gloves

• True ease of use with large buttons and simple to understand text and symbols

• Built-in air compressor and gas regulator

• Calibration standards supplied as standard in 10,000ppm concentrations

• Auto-read technology enables operator independent determination of results

• User selectable decimal places

• IQ, OQ, PQ web-based certification available: IQ OQ PQ is completely unique to the analytical instrumentation arena.

• Complete set of basic labware included to get you started

4 Simultaneous channels for analysis of Na, K, Li & Ca. Built in air compressor, gas regulator & drain trap. Starter Pack and Fluids Kit “Just Add Gas”, (100V-250V, 50/60Hz). Gas hose and waste tube. Digital operating manual, PC software (with Interface cable).
Including Starter Pack Containing : Fluid Kit: Diluent Concentrate (500ml), Decon 90 (150ml), Sodium Standard 10,000ppm (150ml), Potassium Standrad 10,000ppm (150 ml), Lithium Standrad 10,000ppm (150 ml), Calcium Standrad 10,000ppm (150 ml).
Labware Kit: 1ml Pipettes(10), 10ml Pipettes (10),100ml Volumetric Flask (1) and Sample Cups (100).

The BWB Flash is the first and only fully configurable, up to four channel flame photometer that detects and displays all calibrated ions at the same time.

The BWB Flash was created by combining the award-winning features of our XP model with new, innovative, and cutting-edge technology to provide unrivalled levels of accuracy, usability, and reliability while significantly reducing analysis time. When a different measurement is required, our customers do not need to waste valuable time changing filters and re-calibrating, as is a common requirement in all other Flame Photometer designs from 1951 to the present.

Our metal casework creates a sturdy portable instrument with nearly limitless future recycling possibilities. Of course, ROHS-compliant components and materials are used throughout.

The BWB Carbon Footprint is exceptionally low, in keeping with the company’s goals of being a responsible manufacturer, and we’ve succeeded in lowering the gas consumption rate by 13% while also lowering the electricity consumption (kWh) by 26% compared to previous model generations.

Unlike other manufacturers who charge extra for essential accessories, BWB includes everything needed to use the product right away. Simply add Gas!! (Propane, LPG, or butane) We also include data sharing via USB from the BWB Flash to your PC as standard. This connects the BWB Flame Emission Spectrometer (FES) output to the Internet or your company intranet systems, allowing for Distributed Control, which is critical for multinational corporations, universities, and government agencies.

The BWB Flash is available in 7 different models with a variety of different detection capabilities. This table details each of the models:

1 channel Flame Photometer for analysis of Ca. Built in air compressor, gas regulator & drain trap. Starter Pack and Fluids Kit “Just Add Gas”, (100V-250V, 50/60Hz). Gas hose and waste tube. Digital operating manual, PC software (with Interface cable).
Including Starter Pack Containing : Fluid Kit: Diluent Concentrate (500ml), Decon 90 (150ml), Calcium Standard 10,000ppm (150ml).
Labware Kit: 1ml Pipettes(10), 10ml Pipettes (10),100ml Volumetric Flask (1) and Sample Cups (100).

The BWB Flash is the first and only fully configurable, up to four channel flame photometer that detects and displays all calibrated ions at the same time.

The BWB Flash was created by combining the award-winning features of our XP model with new, innovative, and cutting-edge technology to provide unrivalled levels of accuracy, usability, and reliability while significantly reducing analysis time. When a different measurement is required, our customers do not need to waste valuable time changing filters and re-calibrating, as is a common requirement in all other Flame Photometer designs from 1951 to the present.

Our metal casework creates a sturdy portable instrument with nearly limitless future recycling possibilities. Of course, ROHS-compliant components and materials are used throughout.

The BWB Carbon Footprint is exceptionally low, in keeping with the company’s goals of being a responsible manufacturer, and we’ve succeeded in lowering the gas consumption rate by 13% while also lowering the electricity consumption (kWh) by 26% compared to previous model generations.

Unlike other manufacturers who charge extra for essential accessories, BWB includes everything needed to use the product right away. Simply add Gas!! (Propane, LPG, or butane) We also include data sharing via USB from the BWB Flash to your PC as standard. This connects the BWB Flame Emission Spectrometer (FES) output to the Internet or your company intranet systems, allowing for Distributed Control, which is critical for multinational corporations, universities, and government agencies.

• Large 5″ touch screen display compatible with the majority of disposable laboratory gloves

• True ease of use with large buttons and simple to understand text and symbols

• Built-in air compressor and gas regulator

• Calibration standards supplied as standard in 10,000ppm concentrations

• Auto-read technology enables operator independent determination of results

• User selectable decimal places

• IQ, OQ, PQ web-based certification available: IQ OQ PQ is completely unique to the analytical instrumentation arena.

• Complete set of basic labware included to get you started

1 channel Flame Photometer for analysis of K. Built in air compressor, gas regulator & drain trap. Starter Pack and Fluids Kit “Just Add Gas”, (100V-250V, 50/60Hz). Gas hose and waste tube. Digital operating manual, PC software (with Interface cable).
Including Starter Pack Containing : Fluid Kit: Diluent Concentrate (500ml), Decon 90 (150ml), Potassium Standard 10,000ppm (150ml).
Labware Kit: 1ml Pipettes(10), 10ml Pipettes (10),100ml Volumetric Flask (1) and Sample Cups (100).

The BWB Flash was created by combining the award-winning features of our XP model with new, innovative, and cutting-edge technology to provide unrivalled levels of accuracy, usability, and reliability while significantly reducing analysis time. When a different measurement is required, our customers do not need to waste valuable time changing filters and re-calibrating, as is a common requirement in all other Flame Photometer designs from 1951 to the present.

Our metal casework creates a sturdy portable instrument with nearly limitless future recycling possibilities. Of course, ROHS-compliant components and materials are used throughout.

The BWB Carbon Footprint is exceptionally low, in keeping with the company’s goals of being a responsible manufacturer, and we’ve succeeded in lowering the gas consumption rate by 13% while also lowering the electricity consumption (kWh) by 26% compared to previous model generations.

Unlike other manufacturers who charge extra for essential accessories, BWB includes everything needed to use the product right away. Simply add Gas!! (Propane, LPG, or butane) We also include data sharing via USB from the BWB Flash to your PC as standard. This connects the BWB Flame Emission Spectrometer (FES) output to the Internet or your company intranet systems, allowing for Distributed Control, which is critical for multinational corporations, universities, and government agencies.

• Large 5″ touch screen display compatible with the majority of disposable laboratory gloves

• True ease of use with large buttons and simple to understand text and symbols

• Built-in air compressor and gas regulator

• Calibration standards supplied as standard in 10,000ppm concentrations

• Auto-read technology enables operator independent determination of results

• User selectable decimal places

• IQ, OQ, PQ web-based certification available: IQ OQ PQ is completely unique to the analytical instrumentation arena.

• Complete set of basic labware included to get you started

1 channel Flame Photometer for analysis of Li. Built in air compressor, gas regulator & drain trap. Starter Pack and Fluids Kit “Just Add Gas”, (100V-250V, 50/60Hz). Gas hose and waste tube. Digital operating manual, PC software (with Interface cable).
Including Starter Pack Containing : Fluid Kit: Diluent Concentrate (500ml), Decon 90 (150ml), Lithium Standard 10,000ppm (150ml).
Labware Kit: 1ml Pipettes(10), 10ml Pipettes (10),100ml Volumetric Flask (1) and Sample Cups (100).

The BWB Flash is the first and only fully configurable, up to four channel flame photometer that detects and displays all calibrated ions at the same time.

The BWB Flash was created by combining the award-winning features of our XP model with new, innovative, and cutting-edge technology to provide unrivalled levels of accuracy, usability, and reliability while significantly reducing analysis time. When a different measurement is required, our customers do not need to waste valuable time changing filters and re-calibrating, as is a common requirement in all other Flame Photometer designs from 1951 to the present.

Our metal casework creates a sturdy portable instrument with nearly limitless future recycling possibilities. Of course, ROHS-compliant components and materials are used throughout.

The BWB Carbon Footprint is exceptionally low, in keeping with the company’s goals of being a responsible manufacturer, and we’ve succeeded in lowering the gas consumption rate by 13% while also lowering the electricity consumption (kWh) by 26% compared to previous model generations.

Unlike other manufacturers who charge extra for essential accessories, BWB includes everything needed to use the product right away. Simply add Gas!! (Propane, LPG, or butane) We also include data sharing via USB from the BWB Flash to your PC as standard. This connects the BWB Flame Emission Spectrometer (FES) output to the Internet or your company intranet systems, allowing for Distributed Control, which is critical for multinational corporations, universities, and government agencies.

• Large 5″ touch screen display compatible with the majority of disposable laboratory gloves

• True ease of use with large buttons and simple to understand text and symbols

• Built-in air compressor and gas regulator

• Calibration standards supplied as standard in 10,000ppm concentrations

• Auto-read technology enables operator independent determination of results

• User selectable decimal places

• IQ, OQ, PQ web-based certification available: IQ OQ PQ is completely unique to the analytical instrumentation arena.

• Complete set of basic labware included to get you started

1 channel Flame Photometer for analysis of Na. Built in air compressor, gas regulator & drain trap. Starter Pack and Fluids Kit “Just Add Gas”, (100V-250V, 50/60Hz). Gas hose and waste tube. Digital operating manual, PC software (with Interface cable).
Including Starter Pack Containing : Fluid Kit: Diluent Concentrate (500ml), Decon 90 (150ml), Sodium Standard 10,000ppm (150ml).
Labware Kit: 1ml Pipettes(10), 10ml Pipettes (10),100ml Volumetric Flask (1) and Sample Cups (100).

The BWB Flash was created by combining the award-winning features of our XP model with new, innovative, and cutting-edge technology to provide unrivalled levels of accuracy, usability, and reliability while significantly reducing analysis time. When a different measurement is required, our customers do not need to waste valuable time changing filters and re-calibrating, as is a common requirement in all other Flame Photometer designs from 1951 to the present.

Our metal casework creates a sturdy portable instrument with nearly limitless future recycling possibilities. Of course, ROHS-compliant components and materials are used throughout.

The BWB Carbon Footprint is exceptionally low, in keeping with the company’s goals of being a responsible manufacturer, and we’ve succeeded in lowering the gas consumption rate by 13% while also lowering the electricity consumption (kWh) by 26% compared to previous model generations.

Unlike other manufacturers who charge extra for essential accessories, BWB includes everything needed to use the product right away. Simply add Gas!! (Propane, LPG, or butane) We also include data sharing via USB from the BWB Flash to your PC as standard. This connects the BWB Flame Emission Spectrometer (FES) output to the Internet or your company intranet systems, allowing for Distributed Control, which is critical for multinational corporations, universities, and government agencies.

• Large 5″ touch screen display compatible with the majority of disposable laboratory gloves

• True ease of use with large buttons and simple to understand text and symbols

• Built-in air compressor and gas regulator

• Calibration standards supplied as standard in 10,000ppm concentrations

• Auto-read technology enables operator independent determination of results

• User selectable decimal places

• IQ, OQ, PQ web-based certification available: IQ OQ PQ is completely unique to the analytical instrumentation arena.

• Complete set of basic labware included to get you started