BWB XP Flame Photometer

SKU: BWB-XP-G4-2

Complete with 5 simultaneous detectors Na, K, Li, Ca, Ba, Gas Regulator, Air Compressor, Inbuilt Starter Pack and Fluids Kit “Just Add Gas”, (100V-250V, 50/60Hz), Drain trap connecting tubes, operating manual PC software (with Interface cable), Including Starter Pack Containing Fluid Kit Diluent Concentrate (500ml), Decon 90 (150ml), Sodium Standard 10,000ppm (150ml), Potassium Standard 10,000ppm (150ml), Lithium Standard 10,000ppm (150ml), Calcium Standard 10,000ppm (150ml), Barium Standard 10,000ppm (150ml), Labware Kit 1ml Pipettes(10), 10ml Pipettes (10), 100ml Volumetric Flask (1) and Sample Cups (100)

The BWB XP is the first and only 5 channel flame photometer with simultaneous detection and display of all 5 elements. The BWB XP was designed from the ground up, using new, innovative and modern technology to give unsurpassed levels of accuracy, usability and reliability while significantly reducing analysis time. Our customers do not need to waste valuable time changing filters and re-calibrating when a different measurement is required, as is a common requirement in all other Flame Photometer designs from 1951 to the present. With clean lines and contemporary bright colour schemes, the XP looks exceptionally modern and will fit into any laboratory. The instrument has a large LCD display, which can be viewed easily from any angle. Our metal casework provides a sturdy portable instrument and enables future recycling opportunities. ROHS compliant components and materials are used wherever possible. The BWB Carbon Footprint is exceptionally low, in keeping with corporate objectives of being a responsible manufacturer. Unlike other manufacturers who charge extra for vital accessories, BWB include everything required to use the product straight out of the box. Just add Gas!! (Propane, LPG or butane). We also provide as standard, data sharing via USB from the BWB XP to your PC. This ties the output of the BWB Flame Emission Spectrometer (FES) to the Internet or your company intranet systems and facilitates Distributed Control which is vital for Multi-National companies, Universities and various Governmental agencies.

  • Simultaneous detection and display of all 5 atoms of interest

  • Intuitive user interface for true ease of use

  • Display prompts step by step operation

  • Built-in air compressor

  • Solutions and labware included

  • Data sharing via pc link via USB

  • Operator independent determination of results

  • 5 user selectable units of measure

  • User selectable decimal places

  • Integrated printer option uses readily available paper

  • IQ, OQ, PQ web-based certification available: IQ OQ PQ is completely unique in the analytical instrumentation arena.

  • Correction of Ca for the interference from high levels of Na

Add to Quote
SKU: BWB-XP-G4-2 Category:
Features

Sample rate

2 – 3.5ml/min

Tubing materials

Silicone and Tygon®

Required desk space for Instrument

50cm (H) x 45cm (W) x 45cm (D)*

For Safety reasons the Flame photometer requires 1m of unobstructed space above to allow dissipation of heat from the chimney.

Instrument size

XP Flame Photometer
51cm (H) x 39cm (W) x 35cm (D)
(20in x 15in x 14in)

Shipping
65cm (H) x 49cm (W) x 43cm (D)
(25in x 19in x 17in)

Weight

XP Flame Photometer – 14kg (30.8lbs)

Shipping – 25kg (55.1 lbs)

Power requirements

100V – 250V AC at 50 or 60Hz automatically selecting

Readout

LCD, four line, alpha numeric, back lit.

Optimal range

Single point calibration

Na 0.1 – 60ppm

K 0.05 – 100ppm

Li 0.05 – 50ppm

Ca 1.0 – 100ppm

Ba 1.6 – 100ppm

Multi Point Calibration

Na 0.1 – 1000ppm

K 0.05 – 1000ppm

Li 0.05 – 1000ppm

Ca 1.0 – 1000ppm

Ba 5.0 – 3000ppm

Reproducibility

<1% Coefficient of variability for 20 consecutive samples over ten minutes at concentrations of 100ppm or less. (After instrument stabilisation).

Specificity

Na/K/Li = <1% to each other when equal in concentration at <100ppm

Limit of detection (LOD) and
limit of quantification (LOQ)

LOD                          LOQ

Na – 0.03ppm      Na – 0.1ppm

K – 0.02ppm         K – 0.05ppm

Li – 0.02ppm         Li – 0.05ppm

Ca – 0.3ppm          Ca – 1ppm

Ba – 1.6ppm           Ba – 5.0ppm

Time to stability

Less than 15 seconds after sample is introduced into the flame.

Ions measured

Simultaneous measurement of Na, K, Li, Ca, Ba

Interfaces

USB

0-2.5 volt output (based on sample concentration linked to element of users choice)

Optional 4-20mA output in place of the above

Optional integrated printer

.csv and .pdf generated reports and files via FP-PC software

Recommended minimum warm up time based on ambient temperature

21ºC – 25 minutes

Fuel requirement

Propane, Butane or Natural Gas* regulated to 19Bar. Flow rate of 0.4l/min

*with modifications. BWB Technologies recommends either Propane or Butane for optimum results.

Specifications
Parameter Value
Product type Multi Channel Flame Photometers
Brand
Accessories

Optional Accessories

ProductPrice
BWB BWB Automatic Fluid Handling System
SKU: 019-700
£ 0.00
Add to Quote
BWB XP IQ OQ PQ Kit
SKU: 019-555
£ 0.00
Add to Quote
Add 1 year (Includes 1x annual service kits)
SKU: 999-981
£ 0.00
Add to Quote
Add 2 years (includes 2x annual service kits)
SKU: 999-982
£ 0.00
Add to Quote
Add 3 years (includes 3x annual service kits)
SKU: 999-983
£ 0.00
Add to Quote
Add 4 years (includes 4x annual service kits)
SKU: 999-984
£ 0.00
Add to Quote
BWB XP-Fluids Kit
SKU: 019-631
£ 0.00
Add to Quote
BWB XP-Calibration Kit
SKU: 019-630
£ 0.00
Add to Quote
BWB Diluent Concentrate (500ml) makes 500 liters
SKU: 019-015
£ 0.00
Add to Quote
BWB Di-Ionised Water, 1 Litre
SKU: 019-051
£ 0.00
Add to Quote
BWB Decon 90 cleaning agent concentrate, 150ml
SKU: 019-050
£ 0.00
Add to Quote
BWB Sodium Standard 10,000ppm (150ml) makes 15 liters of 100ppm Standard
SKU: 019-010
£ 0.00
Add to Quote
BWB Potassium Standard 10,000ppm (150ml) makes 15 liters of 100ppm Standard
SKU: 019-011
£ 0.00
Add to Quote
BWB Lithium Standard 10,000ppm (150ml) makes 15 liters of 100ppm Standard
SKU: 019-012
£ 0.00
Add to Quote
BWB Calcium Standard 10,000ppm (150ml) makes 15 liters of 100ppm Standard
SKU: 019-013
£ 0.00
Add to Quote
BWB Barium Standard 10,000ppm (150ml) makes 15 liters of 100ppm Standard
SKU: 019-014
£ 0.00
Add to Quote
BWB Nebulizer assembly with Aspiration Kit
SKU: 018-527
£ 0.00
Add to Quote
BWB Preventative Maintenance Kit FP G4 (from S/N 04-01-001)
SKU: 100-027
£ 0.00
Add to Quote
BWB Annual Service Kit FP G4 (from S/N 04-01-001)
SKU: 100-028
£ 0.00
Add to Quote
Add to Quote
BWB XP IQ OQ PQ Kit
SKU: 019-555
£ 0.00
Add to Quote
Add to Quote
Add to Quote
Add to Quote
Add to Quote
BWB XP-Fluids Kit
SKU: 019-631
£ 0.00
Add to Quote
BWB XP-Calibration Kit
SKU: 019-630
£ 0.00
Add to Quote
Add to Quote
BWB Di-Ionised Water, 1 Litre
SKU: 019-051
£ 0.00
Add to Quote
Add to Quote
Add to Quote
Add to Quote
Add to Quote
Add to Quote
Add to Quote
Add to Quote
Add to Quote
Add to Quote
Downloads
Technical Data Sheet
bwb-xp-brochure-email-ready-2
About brand
Flame Photometers: BWB Technologies (UK) have revolutionised what can be achieved using low temperature flame analysis. They are the first real alternative to AAS and ICP for measuring Lithium Li, Sodium Na, Potassium K, Calcium Ca & Barium Ba. BWB continues to develop and enhance flame photometer technology and accessories.