Flash FL-L Flame Photometer
1 channel Flame Photometer for analysis of Li. Built in air compressor, gas regulator & drain trap. Starter Pack and Fluids Kit “Just Add Gas”, (100V-250V, 50/60Hz). Gas hose and waste tube. Digital operating manual, PC software (with Interface cable).
Including Starter Pack Containing : Fluid Kit: Diluent Concentrate (500ml), Decon 90 (150ml), Lithium Standard 10,000ppm (150ml).
Labware Kit: 1ml Pipettes(10), 10ml Pipettes (10),100ml Volumetric Flask (1) and Sample Cups (100).
The BWB Flash is the first and only fully configurable, up to four channel flame photometer that detects and displays all calibrated ions at the same time.
The BWB Flash was created by combining the award-winning features of our XP model with new, innovative, and cutting-edge technology to provide unrivalled levels of accuracy, usability, and reliability while significantly reducing analysis time. When a different measurement is required, our customers do not need to waste valuable time changing filters and re-calibrating, as is a common requirement in all other Flame Photometer designs from 1951 to the present.
Our metal casework creates a sturdy portable instrument with nearly limitless future recycling possibilities. Of course, ROHS-compliant components and materials are used throughout.
The BWB Carbon Footprint is exceptionally low, in keeping with the company’s goals of being a responsible manufacturer, and we’ve succeeded in lowering the gas consumption rate by 13% while also lowering the electricity consumption (kWh) by 26% compared to previous model generations.
Unlike other manufacturers who charge extra for essential accessories, BWB includes everything needed to use the product right away. Simply add Gas!! (Propane, LPG, or butane) We also include data sharing via USB from the BWB Flash to your PC as standard. This connects the BWB Flame Emission Spectrometer (FES) output to the Internet or your company intranet systems, allowing for Distributed Control, which is critical for multinational corporations, universities, and government agencies.
-
Large 5″ touch screen display compatible with the majority of disposable laboratory gloves
-
True ease of use with large buttons and simple to understand text and symbols
-
Built-in air compressor and gas regulator
-
Calibration standards supplied as standard in 10,000ppm concentrations
-
Auto-read technology enables operator independent determination of results
-
User selectable decimal places
-
IQ, OQ, PQ web-based certification available: IQ OQ PQ is completely unique to the analytical instrumentation arena.
-
Complete set of basic labware included to get you started
Available on backorder
Sample rate
2.5 – 4ml/min
Tubing materials
Silicone and Tygon®
Required desk space for Instrument
101*cm (H) x 45cm (W) x 35cm (D)
*For Safety reasons the Flame photometer requires 1m of unobstructed space above to allow dissipation of heat from the chimney.
Instrument size
Flash Photometer
51cm (H) x 33cm (W) x 35cm (D)
(20in x 13in x 14in)
Shipping
65cm (H) x 49cm (W) x 43cm (D)
(25in x 19in x 17in)
Weight
Flash Photometer – 10kg (22.1lbs)
Shipping – 18kg (39.7 lbs)*
*subject to vary based on accessories included
Power requirements
100V – 250V AC at 50 or 60Hz automatically selecting
Readout
5″ colour capacitive touch screen display
Optimal range
Single point calibration
Li 0.05 – 50ppm
Multi Point Calibration (with dilution)
Li 0.05 – 1000ppm
Reproducibility
<1% Coefficient of variability for 20 consecutive samples over ten minutes at concentrations of 100ppm or less. (After instrument stabilisation).
Specificity
Li = <1% to each other when equal in concentration at <100ppm
Limit of detection (LOD) and
limit of quantification (LOQ)
LOD LOQ
Li – 0.02ppm Li – 0.05ppm
Time to stability
Less than 15 seconds after sample is introduced into the flame.
Ions measured
Simultaneous measurement of model specific elements
Interfaces
USB
0-2.5 volt output (based on sample concentration linked to element of users choice)
Optional 4-20mA output in place of the above
Optional integrated printer
.csv and .pdf generated reports and files via FP-PC software
Recommended minimum warm up time based on ambient temperature
21ºC – 25 minutes
Fuel requirement
Propane, Butane or Natural Gas* regulated to 19Bar.
Flow rate of 0.4l/min
*with modifications. BWB Technologies recommends either Propane or Butane for optimum results.
| Parameter | Value |
|---|---|
| Product type |
Single Channel Flame Photometers |
| Brand |




