The Stuart range of shaking incubators include the Stuart SI505, specifical design for shaking microtitre plates during incubation, the SI500 shaking incubator for up to 1L flasks and the SI600 for up to 2L flasks. Both the SI500 & SI600 offer orbital shaking action in a benchtop incubator, they are ideal for scientists doing cell culturing procedures, especially suspension culture applications. The units can accommodate a variety of flasks and tubes.
The SI19 microtitre plate incubator can accommodate up to 48 plates simultaneously. The SI19 laboratory incubator has an integral over-temperature protection system which automatically tracks the set temperature and controls the heater in the event of a fault. The SI30H is a combined hybridisation incubator shaker and the SI60 range of clear incubators complete the range.
Microgen Bioproducts Path Chek Heat Bath
Compact bench use construction, broad temperature range and portability. The Path Chek® Heat Bath is the perfect tool for laboratory incubations. The simple touch pad controls and a digital display provide for a “set and walk away” temperature selection with unrivaled accuracy.
- Compact design, fits on any crowded benchtop
- Easy to use touchpad and digital control
- Built-in real time temperature monitoring
- Built-in digital timer
- Complete solution – includes heating block
- Unique, bespoke composition
- Purposefully designed to maximise the result quality and accuracy of Path-Chek® products
- Product code PC-HB1 – Path-Chek Heat Bath
- V/HZ 220/240-50/60
- SAFETY CLASS 3.1
- PROTECTION CLASS IP 42
FALC Mini portable incubator ICTP
Ideal for measurements and tests in the field (also for bench applications in laboratory.) Power supply 220V and 12V (cigarette lighter), digital timer: option to program with 5, temperature steps, and cooling by Peltier technology
FALC Mini incubator ICT5.4, ICT18, ICT28
Incubators with transparent Plexiglas door to inspect the chambers. Natural air circulation, electronic temperature control with microprocessor PID Probe PT 100 Ø10 mm hole on the top side to insert a thermometer or a probe.
FALC Mini Incubators for Precide Thermostat Applications ICT52, ICT80, ICT120, ICT 240
External structure in steel sheet coated with antiacid epoxy powder. Inner chamber in 18/8 stainless steel. Inner door in tempered glass Ø45 mm hole on the back side to discharge exhaust fumes with open/close adjustment device for cables, probes, etc. Ø10 mm hole on the top side to insert a thermometer or a probe. Temperature control with microprocessor. Timer from 0 to 12 hours + infinite.
FALC Incubators for precise thermostat applications ICT52, ICT80, ICT120, ICT240
External structure in steel sheet coated with antiacid epoxy powder. Inner chamber in 18/8 stainless steel. Inner door in tempered glass Ø45 mm hole on the back side to discharge exhaust fumes with open/close adjustment device for cables, probes, etc. Ø10 mm hole on the top side to insert a thermometer or a probe. Temperature control with microprocessor. Timer from 0 to 12 hours + infinit
FALC Refrigerated Incubators ICT-A 52, ICT-A 80, ICT-A 120 (Applications below room temperature)
External structure coated in antiacid epoxy powder. Inner chamber in stainless steel 18/8. Inner door in tempered glass The internal temperature is controlled by a PID microprocessor. Digital timer from 0 to 99.59 minutes or infinite. Option to lower room temperature of 10°C. Cooling by Peltier technology. Ø10 mm hole on the top side to insert a thermometer or a probe.
FALC Refrigerated Incubators with ramps for precise thermostat applications ICT-AR 52, ICT- AR 80, ICT-AR 120
Temperature control by microprocessor PID and adjustable safety thermostat with optimization of times. External structure in steel sheet coated with antiacid epoxy powder. Inner chamber in stainless steel 18/8 Ø10mm hole on the top side to insert a thermo- meter or a probe. Adjustable-speed ventilation (STF-F series) Programmable with ramps and serial interface RS 232. Working programs with 8 segments.
FALC Refrigerated incubator 0°C ÷ 100°C
External structure in steel sheet coated with antiacid epoxy powder. Inner chamber in 18/8 stainless steel. Second door in tempered glass Fast and powerful refrigeration system. Working temperature from 0°C to 100°C. Sterilization Cycle (160°C per 2,5 hours). RS-485 output Data management software, cable and serial USB Adapter.
FALC High precision refrigerated incubator with data recording HPI
Insulation with smoke-proof, anti-dust and self-extinguishing insulator. Second glass door. Ethernet port Setting temperature from 4°C to 50°C
eco-friendly. Temperature is controlled by a double PID.
Software Review Data recording 50MB of integrated ash memory. Option to save data to USB. 1/4 VGA colour LCD display. Multilingual support (Italian, English, French, German and Spanish)
**Ideal for pharmaceutical companies
Refrigerated incubator with shaking function HATCHMASTER
This FALC Incubator offera a Soft-Touch working panel for easy use and the option to change door opening direction (left or right)
A double glass door for the inside control of the high-efficiency DC motor compartment Peltier thermoelectric system, digital control for high precision. Memory with protection in the event of power failure. PID Circuit for temperature stability control Two internal movement options - horizontal and orbital. Temperature control from 15 to 60 °C. Option to program the temperature increase with a software by a PC. Programming control system, equipped with audible alarm
**Ideal for biotechnology laboratories and incubation of cell cultures. Incubator Hatch-Master with double shaking. Useful in laboratories of biotechnology, ideal for incubation of various types of cell cultures. The system thus combined ensures full control of temperature and movement of the shaker with good precision. It's easy to program and option to set sequential operations. It comes complete with a buzzer in case the set temperature is exceeded of +5° C.